VILLBAU Enigma II Service Manual

ENIGMA IP2Monitoring Receiver(and IP receiver card)Programming Manual6 / 11 / 2014

Received events in Enigma IP2 can be checked easily with a simple web browseraccess. For this IP address (and port if it is different f

7. FIRMWARE UPGRADE AND OTHER FUNCTIONSIt is recommended to upgrade regularly firmware of the unit to use new functions andeliminate possible bugs.Fir

5. The following window will pop up if you use IP Card update.6. Choose the COM port where IP card is connected. Note: The baudrate should be set to 5

8. SYSTEM MESSAGESSystem Message Code DescriptionDATAFILE MODIFY B1 IP receiver card web browser data file modifiedSETTING MODIFY B2 IP receiver card

IP RESTORE 3692IP communication restored for the given clientaccount where communication was lostZ0 The given client account was deleted o

10. TECHNICAL DATAProduct ENIGMA IP2Power supply 12 Vdc @ 500 mAMaximum current consumption about 250 mAEvent buffer up to 20.000 eventsMonitored IP d

CONTENT1. INTRODUCTION...32. SYSTE

1. INTRODUCTIONThank you for choosing our product. This modern and reliable monitoring receiver notonly guarantees the highest level of security, but

2. SYSTEM STRUCTUREThe Enigma IP2 monitoring receiver is ideal and cost-effective solution to build-up amonitoring station, where transmission is sent

Connectors and LED signalsThere are the following connectors on the backside of the receiver:Power supply connector: 12 VDC power supply con

4. SYSTEM PROGRAMMING WITH PC SOFTWARETo use the monitoring receiver with monitoring PC connect the mini USB port of receiverto the USB port of the mo

In normal case programming of the monitoring receiver unit can be done through USB(serial) port. After completing appropriate IP settings programming

6. Click to Communication / Write Data menu to send the modified settings to receiver.Note: During data reading (and sending) receiver firmware versio

6. ENIGMA IP2 TESTINGWhen all setting is finished it is possible to test ENIGMA IP2 unit. Testing is also usefulto test data sending from an external